videogeniX uSwitch Installation And Operating Manual page 7

3. Set up a computer on the same network/subnet as the uSwitch. To do this, set the IP address of the computer to
192.168.1.x with subnet mask of 255.255.255.0 (x can be any unused address on that network 2-254) and
should not be in a range designated for DHCP addresses by the router.
4. Connect to the uSwitch by entering its factory default IP address
your computer's browser. If the uSwitch is on a LAN with a router that has reserved the DHCP address of
'192.168.1.199' a conflict can occur. In this case either change the default address of the uSwitch upon
connection or remove '199' from the DHCP reserved address space of the router. (Make sure the uSwitch's
address is not blocked by any firewall you may be using).
5. If this is the first time you are logging on to the uSwitch from your computer, a password dialog box will appear
(see examples below). Enter "admin", for both the User name and Password fields (all lower case). Once logged
on passwords and user names can be changed from the
menus 'admin' is also the default password.
6. Press "OK" to accept the username and password.
uSwitch and uSwitchPro Installation and Operating Manual
Windows Vista
(http://192.168.1.199)
Authorization Configuration Menu. For higher level
Windows 8
into the address bar on
Page 7