SONOTRAX Series Ultrasonic Pocket Doppler User Manual
4.3.2 Playing Sound Files
The recorded sounds are saved as waveform (.wav) files in your computer.
You can play the waveform file with the sound recorder. Run the sound recorder, click on File >
Open, search for the folder and select the file, click on Open to load the file, and then click on
the play key
If you have any other program that supports waveform (.wav) files installed on your PC,
double-click on the file to play it.
4.3.3 Burning CD or Sending in Email
The waveform files saved in your PC are normal audio data files. You can burn them into CDs or
e-mail to whomever you want.
4.3.4 Record Troubleshooting
If there is audio output from the speaker or earphone, but the PC recorder does not have any input.
(The green line recording area has no waveform.) The reason could be:
1. Poor connection of the audio cable between the Doppler and the PC.
- Check the plugs of the cable and re-connect it if any poor connection is detected.
2. The audio cable has been plugged to the wrong socket of the PC, instead of the audio input
socket or the microphone socket.
- Insert the plug to the right socket.
3. The Line in or microphone is muted on PC.
- Change the setting of the PC in these steps:
a) Double-click on the volume symbol in the bottom right corner of your desktop;
b) The volume control menu pops up:
.
- 24 -
Examining