Entering A Pause; Dialing A Stored Number; Chain-Dialing Service Numbers; Testing Stored Emergency Numbers - Radio Shack TAD-1029 Owner's Manual

Digital answering system with 25-channel cordless telephone
Table of Contents

Advertisement

43-789.fm Page 20 Monday, August 16, 1999 8:32 AM
Notes:
• Each tone or pause entry uses
one digit of memory.
• If you wait more than 20 seconds
to press a key or enter more than
16 digits, the phone sounds three
quick beeps. Start over at Step 1.
• To keep your accounts secure,
we recommend you do not store
your personal access code for
services such as bank-by-phone
in a memory location.
3. Press
, then enter a memory lo-
MEM
cation number (
1
to indicate that the number is stored.
To replace a stored number, simply store
a new one in its place.
To clear a memory location (leaving it
empty), press
twice, then press the
MEM
memory location number you want to
clear (
).
1
9

Entering a Pause

In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To do
so, press
to enter a 3-second
PAUSE
pause after entering the access code.
For a longer pause, press
20
). A tone sounds
9
again.
PAUSE

Dialing a Stored Number

To dial a stored number, lift the handset
and press
. When you hear the dial
TALK
tone, press
, then enter the memory
MEM
location number for the stored number.

Chain-Dialing Service Numbers

For quick recall of numbers for special
services (such as alternate long dis-
tance or bank by phone), store each
group of numbers in its own memory lo-
cation.
When calling special services, dial the
service's main number first. Then, at the
appropriate place in the call, press
then enter the memory location number
for the additional stored numbers.
Testing Stored Emergency
Numbers
If you store an emergency service's
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
,
MEM

Advertisement

Table of Contents
loading

This manual is also suitable for:

43-789

Table of Contents