Radio Shack TAD-1029 Owner's Manual page 11

43-789.fm Page 11 Monday, August 16, 1999 8:32 AM
4. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
5. Route the modular cord through ei-
ther groove on the right bottom of
the base and the adapter cord
through the groove below the strain
relief slot.
Strain
Relief
Slot
6. Insert the tabs on the narrow end of
the bracket into the inner pair of
slots near the top of the base as
shown and snap the tabs at the wide
end of the bracket into place.
7. Align the keyhole slots with the
jack on
DC 12V
8. Plug the adapter into a standard AC
9. Plug the end of the modular cord
10. Fully extend the base's antenna and
mounting screws and slide the base
downward to secure it.
outlet. The message counter counts
down from 18 to 00
1029 beeps.
into a modular phone line jack.
place it in a vertical position.
and the TAD-
11