Caller Id Operation - Radio Shack TAD-704 Owner's Manual

43-704.fm Page 18 Wednesday, November 17, 1999 4:47 PM

CALLER ID OPERATION

If you subscribe to Caller ID service from
your phone company, the TAD-704 au-
tomatically displays the information the
phone company sends between the first
and second rings of every call you re-
ceive. It stores up to 68 numbers only or
name and number call records in its
Caller ID memory.
It also shows the date and time the call
was received. The display also shows if
caller information is not available or if
the sender chose not to send the infor-
mation (see "Caller ID Messages" on
Page 19.)
The NEW CALL indicator flashes during
an incoming call, and
Caller ID record appear on the display.
Then the complete Caller ID record ap-
pears after the last ring ends for about 8
seconds.
If you subscribe to your phone compa-
ny's message waiting service, your
TAD-704 informs you when you have a
message waiting. If MESSAGE WAIT-
ING and appear, you have a
voice message in your mailbox.
disappears from the
SAGE WAITING
display after 8 seconds, but
es until you retrieve the message.
18
Note: The message waiting feature
does not work with stutter dial tone ser-
vice.
If your phone company sends informa-
tion indicating that the incoming call is
long distance,
If you receive more than one call (with-
out an accompanying message) from
the same phone number,
appears, and the TAD-704 stores a sin-
gle Caller ID record for that number with
the date and time of the last call. If the
later repeat call has a message but the
previous call does not, the TAD-704
stores the later call as a repeat call
and the record, and
RING
If the previous call has a message but
the later repeat call does not,
pears, and the TAD-704 stores both
Caller ID records. If both of the later and
previous calls have messages,
pears, and the TAD-704 stores both
calls information.
If only Caller ID records (or both of the
incoming messages and Caller ID
records) are full,
xx CALLS xx MSG FULL
TAD-704 answers calls after 3 rings and
plays the second outgoing message
(OGM 2). If no OGM 2 is recorded, the
TAD says "Memory is full." Thank you
MES- for your call."
flash-
appears.
LDC
RPT (repeat)
appears.
RPT
RPT
RPT
Memory is full
appear. The
ap-
ap-
and