Advertisement
RGB Mode
Starts scanning the DALI lines.
Press corresponding button to
move the device into correct group.
Column with discovered devices.
Identifies selected device.
Home screen offers four basic options. User can choose between "pre-set", "custom
dynamic sequences", "static preset" and manual control. Information panel at the
bottom of the screen informs about currently set mode and actual brightness level. In
the bottom-left corner home button is located – pressing home button returns device
to home screen. Use "settings" button to change settings of DALI Touch ME7.
Manual control mode offers direct control over the DALI luminaires. In TW mode user
can control intensity and colour temperature of luminaires. In RGB mode user can
control hue, saturation and intensity. Control is performed when touching and moving
the scroll button of the corresponding slider. Return to the home screen can be done
using "x" button or by using home button.
RGB control
Information panel
Manual
control
www.preussen-automation.eu | service@preussen-automation.eu
DALI Touch ME7 panel is
scanning the lines.
7
Advertisement
