Assembly Assembly on the solid wall 80 mm 228 mm Assembly (Plasterboard, OSB plate, etc.) min. 90 mm 4- 45 mm www.preussen-automation.eu | service@preussen-automation.eu...
Page 7
– pressing home button returns device to home screen. Use ”settings” button to change settings of DALI Touch ME7. Manual control mode offers direct control over the DALI luminaires. In TW mode user can control intensity and colour temperature of luminaires.
Custom dynamic sequences dynamic When selecting ”custom sequences” in any mode a dialog for setting, editing and creating custom dynamic sequences will appear. On the left side of the screen button for loading existing custom dynamic sequences are located. If password protection is set you have to press ”unlock tools”...
Static pre-sets Static pre-sets offer static RGB or TW scenes. The possibilities for their adding and modification are the same as for the dynamic sequences. Preview of currently set scene can be seen in the preview corner on the upperright part of the screen. Currently selected static pre-set is also indicated on the Information panel.
Page 13
Display cleaner disables the sensitivity of touch panel for 10 seconds in order to enable its cleaning without affecting the settings of the panel. System modification and new system initialization button reloads the in- itialization screen and allows for modi- fication of DALI device addressing or completely new initialization of the system.