Axis 230 MPEG-2 User Manual page 34

The System Options
34
Manual IP Configuration
Specify a unique IP address for your camera, to establish communication with
IP Address -
your network. Written as four numbers separated by periods, each number in the address
must be in the range 0 - 255. For example: 192.168.0.125
Note:
IP addresses can be assigned at random within isolated networks, provided that
each given address is unique. To avoid unnecessary clashes, it is strongly recom-
mended that you contact your network administrator prior to assigning an IP
address for your product.
Default Router -
and network segments.
Subnet Mask - Specify the subnet mask for the subnet the AXIS 230 is located on.
The host name entered here will be used in email sent by the AXIS 230, and in
Host Name -
the unit's log files. If the AXIS 230 uses a DNS name on the network, it can be a good idea
to use the same name for the host name and the DNS name.
DNS
Domain Name -
Primary DNS Server -
translation of domain names to IP addresses on your network.
Secondary DNS Server -
HTTP
Enter the HTTP port the AXIS 230 will use. The default setting is 80. Alterna-
Port number -
tively, any port in the range 1024-65535 may be used, but check first with your system
administrator before changing the default setting. See also the special considerations con-
cerning the firewall settings, on page 31.
Network Traffic
This can be used to change the network speed for your camera. Normally, there is no need
to use anything other than Auto-negotiate, which will automatically select the correct
media type. However, if you are using a switch or similar device on your network and need
to specify the media type, then this can be done by selecting the correct type from the
drop-down list.
Specify the default router (Gateway) used for connecting to other networks
Enter the name of the domain your AXIS 230 belongs to.
Enter the IP address of the primary DNS server. This server provides the
This is used if the primary DNS server is unavailable.
AXIS 230