Prestige 610 ADSL PCI Modem
10.3 Problem with Ethernet Adapter
Table 10-3 Troubleshooting Ethernet Adapter Configuration
PROBLEM
I cannot configure my network
adapter after inserting/
uninstalling the Prestige
10-2
This problem may only occur in Windows 2000 computers. This happens if
you did not remove the Prestige physically from the computer after
uninstalling the driver or you did not install the driver properly.
Refer to the Information for Windows 2000 appendix for detailed
information.
You can still use the Ethernet adapter to connect to
CORRECTIVE ACTION
the network.
Troubleshooting