Overlay Image Settings - Axis 213 PTZ User Manual

AXIS 213 - Configuring the PTZ Network Camera
22
Video Stream
Define the maximum video stream time per session in seconds, minutes or hours.
When the set time has expired, a new stream can be started by refreshing the page in
the Web browser. For unlimited video stream time, set this value to 0.
Define the maximum frame rate (fps - frames per second) allowed for each viewer, to
avoid bandwidth problems on the network.
Test - For a preview of the image and overlay settings before saving, click Test. The
Brightness setting does not affect the Test image. When you are satisfied with the
settings, click Save.

Overlay Image Settings

An overlay image is an image included in the video image. This might, for example,
be your own company logo. Follow these instructions to upload and use an overlay
image:
1. Go to Setup | Video & Image | Overlay Image.
2. To upload the file (a logo or image) to the AXIS 213, click the Browse button
and locate it on your computer or server.
3. Click the Upload button and follow the on-screen instructions.
4. The image is now available in the Use overlay image drop-down list.
5. Click Save.
6. Go to Setup | Video & Image and modify the parameters under Overlay
Settings.
Overlay image requirements:
Image Formats
• Windows 24-bit BMP (full color)
• Windows 4-bit BMP (16 colors)
• OS/2 4-bit BMP (16 colors)
Image Size
The height and width of the overlay image in
pixels must be exactly divisible by 4.