Axis 213 PTZ User Manual page 20

AXIS 213 - Configuring the PTZ Network Camera
20
Event Configuration (Administrator/Operator)
Tools
Instructions
Event Servers
Event Types
Port Status
System Options (Administrator)
Tools
Security
Date & Time
Network
Ports & Devices
Maintenance
Support
Advanced
About (Administrator)
Tools
About
Settings / Options / Description
General Instructions
Specify destinations for uploaded image files and/or notification messages from the PTZ Network Cam-
era. FTP servers and HTTP servers are intended for saving image files and HTTP servers and TCP servers
are intended for receiving notification messages.
Set the PTZ Network Camera to act on Triggered or Scheduled Event Types, e.g. to upload images to a
specified destination when an alarm is activated or at a set time.
Shows the status for the inputs and outputs connected to the PTZ Network Camera - see Ports &
Devices under System Options.
Settings / Options / Description
Users Access to the PTZ Network Camera can be restricted to defined users only (max-
imum of 20). The administrator has unrestricted access to the Setup tools and
determines rights for users at 3 levels; Administrator, Operator, Viewer.
IP Address Filter Once enabled, only the IP addresses shown in the list of allowed addresses will
be permitted to access the PTZ Network Camera. All others will be blocked.
Define the date and time settings for your PTZ Network Camera, manually or automatically.
TCP/IP Specify IP address configuration, DNS configuration, Host Name configuration,
Notification of changed IP address. Register/unregister for AXIS Internet
Dynamic DNS Service. Specify HTTP port and network traffic preferences.
SOCKS Specify SOCKS server to use when communicating with hosts on the other side
of a firewall/proxy server.
SMTP (email) Specify the host names or addresses for your primary and secondary mail servers
in the fields provided to allow the PTZ Network Camera to send event and error
email messages to predefined email addresses.
UPnP The Network PTZ Camera includes support for Universal Plug and Play (UPnP).
Enable UPnP (enabled by default) and enter a user friendly name for the AXIS
213.
I/O Ports Configure the 2 digital inputs and 3 relay outputs supported by the AXIS 213.
PTZ Network Camera Maintenance functions to restart the PTZ Network Camera, restore settings,
upgrade the firmware, backup the parameters and restore to previous settings.
Support Overview Troubleshooting guide, generate server report (always attach the Server Report
when contacting your support channel). Axis Support Services information.
Logs & Reports Generate Logs (all log information is shown in one file), Reports (important
information about the server's status) and a parameter list (the unit's parame-
ters and current settings).
Scripting This powerful function allows users to customize and use their own scripts to
create specialized applications.
Plain Config Plain config allows direct access to all the configurable parameters.
Settings / Options / Description
Third Party Software Licenses - Link to the source code for the Linux kernel, Boa and more.