Grab & Record - NewTek 3Play 3P1 User Manual

The layouts for all Multiview monitors is governed by Workspace presets. Roll the mouse over the
Dashboard to reveal the Workspaces menu, and click it. Then select a preset for either any Multiview
using this menu as shown (Figure 62).
Viewports also have further custom options, such as the display of VU meter overlays. See Section 9.1,
Overlay Options for details.
Note: Changing Multiview output options can cause frames to be dropped, so modifications during live
production are discouraged.
DISPLAY SETTINGS
Another item in the Workspaces menu is Display Color Settings. Select this to open a control panel with
multiple tabs, one for each detected display. The Monitor Resolution menu lets you configure the external
Figure 63
6.5 GRAB & RECORD
We've discussed Record configuration back in Section 5.2.1,
and will do so again in Chapter 10.
The Grab feature is a very convenient tool, especially for use
in connection with use of the Export features (Chapter 16)
to upload imagery to popular social media sites, or for
immediate display on output. See Section 10.4 for more
information on Grab.
Page | 63
display device. Select the native resolution of the
device for best results.
The tabs provide Proc Amp controls for the
connected display devices.
These controls directly control graphics the
characteristics of output to each display, and
provide a great deal of convenience especially for
remote displays that would otherwise be difficult
or impossible to access.
Figure 64