NewTek 3Play 3P1 User Manual page 175

The clip previously indexed as "AAA1" (using clip_store) is restored on the source system output channel
connected to network input designated. The playhead is set to the beginning of the clip. (If the indexed
clip is not located, nothing occurs.)
CLIP_ SELECT
Delay (ms) Shortcut
(time) net#
Select a page (or clip) defined by the value assigned to index. This may be a number specifying a particular
page or at times, another property.
For example, sending a "clip_select" command to 3Play with a suitable numeric value assigned as the
"index" key selects a specific Play List tab by index (assuming Play List mode is active. On the other hand,
in Clip List mode, if the value for "index" was "0-023" the clip referred to would be selected.
For example:
Delay (ms)
(time)
This would select the fourth Play List tab on the 3Play output (A or B) connected to the Switcher input.
CLIP_ MOVE
Delay (ms) Shortcut
(time) net#
Move the specified number of pages forwards or backwards from the current page.
For example:
Delay (ms)
(time)
The entry above would select the previous clip on the source connected to the network input designated.
Page | 161
Value Key 1
clip_select index
Shortcut Value
net# clip_select
Value Key 1
clip_ move distance
Shortcut Value
net# clip_move
Value 1
#
Key 1 Value 1
index 4
Value 1
#
Key 1 Value 1
distance -1