Names And Functions - NEC ND-4551 Operating Instructions Manual

English
Laser Safety Information
This drive employs a laser.
Do not remove the cover or attempt
to service this device when connected
due to
the possibility of eye damage.
CAUTION
Adjustment of control or following
procedures other than those specified
herein may result in hazardous
radiation exposure.
Laser Specification:
Semiconductor Laser: 260mW,
783nm; 280mW, 658nm
2
Disposing of your used NEC product
In the European Union
EU-wide legislation as
implemented in each
Member State requires
that used electrical
and electronic products
carrying the mark
must be disposed
of separately from normal household
waste. This includes NEC DVD drives.
When you dispose of such products,
please follow the guidance of your
local authority and/or ask the shop
where you purchased the product.
The mark on the electrical and
electronic products only applies to
the current European Union Member
States.
Outside the European Union
If you wish to dispose of used
electrical and electronic products
outside the European Union, please
contact your local authority and ask
for the correct
method of disposal.
NEC DVD
Internal ATAPI Drive

Names and Functions

Busy Indicator
3 Emergency Eject Hole
This indicator lights during
data read and write operation.
2 Tray Panel
This Panel prevents dust from
entering the DVD Writer and
opens automatically when the
Load/Eject button is pushed. 4 Load/ Eject Button
Front View
1 2 3
±
Writer
Use to remove the disc from
the DVD Writer if the
electrical eject is disabled by
software or if power failure
occurs. (see „Emergency Eject"
for details)
This button is pressed to eject
or retract the disc tray when
the power is on.
4
3