Table of Contents
Advertisement
Receiving a Push 2 Talk Call
To receive a Push 2 Talk call:
1.
Make sure your phone's Push 2 Talk mode is enabled (see
"Setting Push 2 Talk Mode" on page 90).
2.
When you receive a Push 2 Talk call from a contact, "P2T Call,"
the contact's name, and the Push 2 Talk number appear on the
display.
When you receive a group call, "Group Call" appears.
If nobody takes the floor for 20 seconds, the call will be a
missed Push 2 Talk call.
3.
If the person placing the call has kept the floor (held the
Push 2 Talk/Memo button), you will see the contact name and
Push 2 Talk number along with "has floor.," and you will hear the
caller speaking.
4.
When the caller finishes speaking and releases
see "Floor is open." on the display screen. Press and hold
take the floor and reply to the caller. (You will see "You have floor."
and hear a tone confirming that you may speak.)
5.
When the conversation is finished, press
Tip:
You can also receive a Push 2 Talk call with the flip closed. Press and hold
to take the floor when the floor is open.
Note:
You can change the volume and the speakerphone setting while a Push 2
Talk call is activated.
Volume:
Adjust the voice volume by using the Side Up/Down key or by pressing
the navigation key up or down except when you are pressing and holding
Speaker:
Switch the speakerphone on or off by pressing
, you will
to
.
.
.
97
Advertisement
Table of Contents
