Optional Inground Conduit Box; Option 1: Pvc Conduit Installation - MartinLogan OUTDOOR 40SAT User Manual

OPTIONAL INGROUND CONDUIT BOX

Following the same instructions outlined for the Ground Stake
or Surface Mount Bracket accessory . The Outdoor Living
Series Inground Conduit Box can be substituted . Knock out
holes in the Inground Conduit Box as needed . Conduit is sold
separately .
Included:
• (1) Inground Conduit Box
• (1) Two Piece Mounting Post
• (8) Stainless Steel Screws
• (4) Ground Stakes
Recommended Tools:
• Drill
• PVC Glue – for PVC conduit or fittings
• Silicone Caulk
• Shovel
• Hammer
• #2 Phillips Screwdriver
• Wrench
Installation Instructions
IMPORTANT! Test your system before
gluing or caulking any part of the
Inground Conduit Box or any conduit
piping connections. Use silicone caulk to seal any
openings used for cable. Allow caulk and glue to dry
completely before burying the Inground Conduit Box.
OPTION 1: PVC Conduit Installation – Knock out the
conduit openings to be used . Glue the conduit piping to the
Inground Conduit Box .* Draw the cable through the conduit
and pull at least 8 inches of cable into the box cavity .
Note: The Inground Conduit Box openings are 3/4" in
diameter . Other conduit piping sizes may be used with adapters .
12