Installing Surface Mount Bracket Accessory; Attaching Speaker - MartinLogan OUTDOOR 40SAT User Manual

WIRING & SPEAKER INSTALLATION (CONT'D)
Installing Surface Mount Bracket Accessory & Attaching Speaker
1. Remove nut from
the threaded end
of the speaker
arm .
3. Slide the twist cap
over the speaker
arm then slide the
gasketed aluminum
washer (from the
ground stake) over
the threaded end
of speaker arm .
IMPORTANT!
T h e f a c e o f
the aluminum
washer with the
smaller rubber
gasket must be
facing up.
9
2. Remove the twist
cap and gasketed
aluminum washer
from the surface
mount bracket
accessory .
4. Using a wrench,
thread and firmly
tighten the nut
(removed in step 1)
over the threaded
end of the speaker
arm .