MartinLogan OUTDOOR 40SAT User Manual page 11

5. T h r e a d
t h e
s p e a k e r w i r e
t h r o u g h t h e
c e n t e r h o l e
and out of the
wire opening
on the surface
mount bracket
b a s e . P l a c e
surface mount
b r a c k e t b a s e
f l u s h a g a i n s t
the surface you
wish to install
your speaker . To
attach surface
mount bracket
b a s e t o t h e
s u r f a c e , u s e
a p p r o p r i a t e
screws (not supplied) for your installation . For specifications
on screws, see your dealer for details.
Note: For a wall mounted installation where a wire connection
is contained within the surface mount bracket base, please
follow these instructions . It is recommend that the speaker wire
be cut short and the wire sleeve should be removed to expose
the red (+) and black (-) wires . Follow steps 6 a-b, but do not
attach the assembled speaker with surface mount bracket base
until your wire connections are made with silicone-filled wire
connectors covering the exposed wire connections . The wire
connections with silicone- filled wire connectors must be stuffed
inside the surface mount bracket base before attaching to the
desired surface with appropriate screws (not supplied) for your
installation . For specifications on screws, see your dealer for
details .
6. To attach the
a)
speaker to the
surface mount
bracket base:
a) First hand
thread the twist
c a p t o t h e
surface mount
bracket base .
b) Now firmly
t i g h t e n t h e
b)
twist cap with
t h e p r o v i d e d
wrench .
For wiring instructions see 'Speaker &
Burial Cable Connections' on page 11 .
10