Power Management Setup - Acer ASPIRE Z3750 Service Manual

Power Management Setup

Field
ACPI Suspend
Mode
Deep Power Off
Mode
Power On by RTC
Alarm
Power On by PCIE
Devices
Power On by PCI
Devices
Power On by
Modem Ring
Power On by
Onboard LAN
Wake Up by PS/2
KB/Mouse
Wake Up by USB
KB/Mouse
Restore On AC
Power Loss
Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide
Description
Use this item to define how your system suspends. Default value is S3
(STR), the suspend mode is suspend to RAM, i.e., the system shuts
down with the exception of a refresh current to the system memory.
Enables or disables compliance to the Energy-using Products Lot 6
Directives (EuP Lot 6).
Enables or disables the system to wake up from a power-saving mode
when an RTC alarm occurs.
Enables or disables the system to wake up from a power-saving mode
when an event occurs on an installed PCI Express device.
Enables or disables the system to wake up from a power-saving mode
when an event occurs on an installed PCI device.
Enables or disables the system to wake up from a power-saving mode
when a modem signal is received. network message
Enables or disables the system to wake up from a power-saving mode
when the onboard LAN controller received a network message.
Enables or disables the system to wake up from a power-saving mode
when a PS/2 keyboard or mouse is used.
Enables or disables the system to wake up from a power-saving mode
when a USB keyboard or mouse is used.
Select the power state when an AC power loss occurs.
• Off - The computer remains off until the power button is pressed.
• Last State - The computer reverts to the last power state before the
power loss occurred.
• On - The computer switches back on after the AC power loss.
Value
S3 (STR)
S1 (POS)
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Power Off
Power On
Last State
19