Advertisement
Attaching the foot stands
Set the Expansion Module and IP Phone foot stands to the same angle.
1
Align the Top tabs on the foot stands with the slots on the
back of the Expansion Module and IP Phone.
2
And then, move the foot stands upward until it clicks into
place.
For more detailed installation instructions, see the IP8800
Series Quick Installation Guide.
Completing the installation
1
Connect power to the IP Phone. The IP Phone and Expansion Modules power up. The Expansion Modules
use the electrical connection of the IP Phone for power. Expansion Modules do not have their own power
source.
After you power up your IP Phone, the Expansion Module LEDs or LCD display icons flash (depending on
Expansion Module type), until communication with the IP Phone is established. For information about pro-
gramming features, see the IP8800 Series Installer Guide at www.lg-nortel.com.
Wall-mounting the IP Phone and Expansion Modules
1
Remove the foot stands from the IP Phone and Expansion
Module.
2
Ensure that the cables are properly connected to the IP
Phone, and then connect the Expansion Module to your IP
Phone, as previously described.
3
Wall-mount the IP Phone and Expansion Module using
the keyholes in the back of the IP Phone and Expansion
Module.
For more detailed installation instructions, see IP8800 Se-
ries Quick Installation Gudie at www.lg-nortel.com.
IP8800 Series Expansion Modules Quick Installation Guide
IP-88XX Expansion Moudle Installation Guide 1.0.indd 2
IP-88XX Expansion Moudle Installation Guide 1.0.indd 2
Printed In Thailand. Copyright © 2008 LG-Nortel Co.Ltd. All rights reserved.
2
Top Tabs
1
Foot stands
Keyholes
Keyholes
P/NO: MMBB9219501,1.0
2008-04-23 오후 4:41:20
2008-04-23 오후 4:41:20
Advertisement
