Advertisement
Expansion Modules for IP8800
This document provides information about the LCD Expansion Module: 12-Key Self-Labeling and the LED
Expantion Module: 12-Key Paper Label. You can download all required documents at www.lg-nortel.com.
Your Expansion Modules
LCD Expansion Module:
12-Key Self-Labeling
Descripton
The Expansion Modules for IP Phone 8800 Series provide 12 additional line/programmable feature keys for
your IP Phone. You can place the IP Phone and Expansion Modules on your desktop or you can wall-mount the
IP Phone and Expansion Modules.
Up to one LCD or LED Expansion Modules are supported on a single IP Phone. The Expansion Modules are
supported on the IP Phone 8820, 8830 and 8840.
Installation
Caution! To avoid damaging equipment, remove the power from the IP Phone before connecting an
Expansion Module. To install this Expansion Module correctly, please follow the procedures.
Installing the Expansion Modules
1
Remove power from the IP Phone.
2
Remove the foot stand from the IP Phone.
3
At the back of the IP Phone, remove the rubber plug from
the Accessory Expansion Module (AEM) port.
4
Plug the 12- pin cable from the Expansion Module into the
AEM port on the back of the IP Phone.
5
Place the connecting arm of the Expansion Module behind
the IP Phone and align the Expansion Module connect-
ing holes with the connecting holes on the back of the IP
Phone.
6
Turn the screw to the right to connect the Expansion Mod-
ule and IP Phone firmly together.
IP8800 Series Expansion Modules Quick Installation Guide
IP-88XX Expansion Moudle Installation Guide 1.0.indd 1
IP-88XX Expansion Moudle Installation Guide 1.0.indd 1
00 Series
LED Expansion Module:
12-Key Paper Label
Connecting
6
5
4
arms
Connecting
holes
3
AEM Port
2
2008-04-23 오후 4:41:19
2008-04-23 오후 4:41:19
Advertisement
