Setting Accessibility Settings Using Bixby - Samsung Smart Remote E-Manual

Setting accessibility settings using Bixby

Bixby lets you control your TV with voice commands spoken into the microphone built into the Samsung Smart
Remote. To use Bixby, the TV must be set up and tuned and must be connected to the Internet. You can connect the
TV to the Internet during the initial setup or do it later through the settings menu.
There are many commands you can say to control the TV. These can be used together with
voice input and voice output.
To speak a command, press and hold the
below the LED power indicator and above the directional button) and say the command, and then release the
button. The TV will confirm the command.
For example you can:
Turn Voice Guide on:
Press the button on the Samsung Smart Remote, and then say "Voice Guide on".
Turn Video Description on:
Press the button on the Samsung Smart Remote, and then say "Video Description on".
Turn High Contrast on:
Press the button on the Samsung Smart Remote, and then say "High Contrast on".
button (located near the top of the Samsung Smart Remote, directly
- 147 -
Voice Guide to give you