There Is A Problem With The Picture; Testing The Picture - Samsung Smart Remote E-Manual

There Is a Problem with the Picture

When the TV has trouble with the picture, these steps may help resolve the problem.

Testing the picture

Settings
Before you review the list of problems and solutions below, use
caused by the TV. Start Picture Test
The problem
Flickering and Dimming
Component Connections/
Screen Color
Screen Brightness
Ghosting, Blurring, or
Juddering
Support Self Diagnosis
displays a high definition picture you can examine for flaws or faults.
If your TV is flickering or dimming sporadically, you may need to disable some of the energy
efficiency features.
Disable Ambient Light
Settings
●
Settings
●
● Settings
If the color on your TV screen is not correct or the black and white colors are off, run
Picture Test.
● Settings
If the test results indicate that the problem is not caused by the TV, do the following:
● Confirm that the video input connectors are connected to the correct external device video
output connectors.
● Check the other connections as well. If the TV is connected to an external device via
a component cable, confirm that the Pb, Pr, and Y jacks are plugged into their proper
connectors.
If the colors on your TV are correct but just a little too dark or bright, try adjusting the
following settings first.
● Settings
● Settings
● Settings
● Settings
● Settings
Settings
●
If you notice ghosting or blurring on the screen, use the
to resolve the issue.
● Settings
Start Picture Test
Start Picture Test
Try this!
Detection, Power Saving Mode, or
General Eco Solution
General Eco Solution
General Eco Solution
Support Self Diagnosis
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
- 108 -
Try Now
to determine if the problem is
Motion Lighting.
Ambient Light Detection
Power Saving Mode
Motion Lighting
Start Picture Test
Backlight
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Auto Motion Plus Settings
Auto Motion Plus Settings
Start
function