There Is A Problem With The Broadcast; My Computer Won't Connect - Samsung Smart Remote E-Manual

There Is a Problem with the Broadcast

When the TV has difficulties receiving broadcasts, these steps may help resolve the problem.
The problem
"Weak or No Signal"
displayed in TV mode/
cannot find channel.
The TV is not receiving all
channels.
There are no captions with
digital channels.
The picture is distorted.
The picture quality is low.

My Computer Won't Connect

When the TV has difficulties connecting to a PC, these steps may help resolve the problem.
The problem
The "Mode Not Supported"
message appears.
The video is OK but there is
no audio.
Select Source to confirm that the correct input source has been selected.
If the TV is not connected to a cable box or satellite box, run
channels.
● Settings
Confirm that the coaxial cable is securely connected to the TV.
Run Start Setup or Auto Program.
● Settings
● Settings
Go to Caption Settings and change the
● Settings
Some channels may not have caption data.
The compression of the video content may cause picture distortions.
This is especially true with fast moving pictures from sports programs and action movies.
A weak signal can cause picture distortions. This is not a problem with the TV.
Select high definition (HD) channels or programs.
Set your PC's output resolution so it matches a resolution supported by the TV.
If you are using an HDMI connection, check the audio output setting on your PC.
If you are using an HDMI-to-DVI cable, a separate audio cable is required.
Note that the HDMI-to-DVI connection is only supported by the HDMI (DVI) port and this
port does not transmit audio.
To listen to the computer sound, connect external speakers to the audio output connection
of the computer.
Try this!
Broadcasting Auto Program
General Start Setup
Broadcasting Auto Program
Caption Mode.
General Accessibility
Try this!
- 112 -
Auto Program to search for
Caption Settings Caption Mode