Advertisement

Quick Links

FS1000
AirFloss Pro

Advertisement

Table of Contents
loading

Summary of Contents for Philips Sonicare AirFloss Pro FS1000

  • Page 1 FS1000 AirFloss Pro...
  • Page 4 empty page before TOC...
  • Page 5 English 6...
  • Page 6 English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Use AirFloss with your favorite mouthwash as part of your oral care routine. In addition to brushing, AirFloss helps reduce the plaque in between teeth in order to improve your gum health.
  • Page 7 4 weeks of use. - If you have medical concerns, consult your doctor before you use this appliance. - This Philips appliance complies with the safety standards for electromagnetic devices. If you have a pacemaker or other implanted device,...
  • Page 8: Electromagnetic Fields (Emf)

    Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Your Philips AirFloss Pro and Fill & Charge station (Fig. 1) 1 Nozzle tip 2 AirFloss Pro nozzle 3 Activation button...
  • Page 9: Getting Started

    Note 1: The AirFloss will only charge if placed in the direction indicated above. Note 2: The Fill & Charge station can charge other Philips Sonicare devices, including the following Philips Sonicare Rechargable Power Toothbrushes: 3-Series, Flexcare, Flexcare+, Flexcare Platinum, HealthyWhite, HealthyWhite+, and EasyClean.
  • Page 10 2 Remove the reservoir lid and fill the reservoir. For optimal results with your AirFloss, we recommend you use an antimicrobial mouth rinse (such as Philips Sonicare BreathRx). Note: Recommended to not use with water. Note: Fill the reservoir only up to the MAX indication.
  • Page 11: Using Your Airfloss Pro

    English 2 Once filled, press the eject button to release the AirFloss handle and Fill & Charge station cup (if the eject button is pressed before the pump stops, the pump shuts off automatically but your AirFloss handle reservoir may not be full). 3 Remove the AirFloss handle and begin using your AirFloss.
  • Page 12: Auto-Burst Function

    English Double burst: 2 LEDs Triple burst: 3 LEDs Note: The AirFloss remembers what mode was selected last and it is ready for the next use. If your AirFloss becomes fully drained of power, it will go back to the triple burst default mode once it has been recharged.
  • Page 13: Charger Insertion And Removal Instructions

    Charger insertion and removal instructions Your Fill & Charge station charger can be removed and used separately as a standalone charger for your AirFloss and many other Philips Sonicare toothbrush handles. To remove the charger 1 Remove the reservoir from the Fill & Charge station base.
  • Page 14 English 3 Insert the charger base from the bottom of the Fill & Charge station, with the charger peg sticking up. You will hear a click sound once it is fully engaged. 4 Use the cord wrap around the Fill & Charge station to your desired length.
  • Page 15 English Cleaning Fill & Charge station and handle 1 Empty mouthwash from Fill & Charge station reservoir and handle reservoir. 2 Fill the station reservoir with warm water. 3 Place handle in handle cup and engage with Fill & Charge station; letting the station fill the handle until the motor stops (10 seconds).
  • Page 16 English 8 Place the AirFloss handle in the handle cup and engage the handle cup to the Fill & Charge station, running one more cycle and purging any remaining fluid in between the reservoir and the handle in the Fill & Charge station. 9 Eject the AirFloss handle and the handle cup, remove the AirFloss handle from the handle cup, open the door of the AirFloss handle to...
  • Page 17: Handle And Nozzle

    English d To insert the handle cup: slide the handle cup into the base. You will hear a click once it is engaged. 11 Empty and dry Fill & Charge station reservoir. 12 Fill the Fill & Charge station reservoir with new mouthrinse, place the handle in the handle cup and engage with the Fill &...
  • Page 18 You can use the cord wrap to store the power cord in an organized manner. The charger can be removed from the Fill & Charge station and can be used separately to charge your AirFloss or other compatible Philips Sonicare devices.
  • Page 19: Removing The Rechargeable Battery

    Fill & Charge station Please note that this process is not reversible. To remove the battery, you need a Philips-Head screwdriver and scissors. Observe basic safety precautions when you follow the procedure outlined below. Be sure to protect your eyes, hands, fingers, and the surface on which you work.
  • Page 20 English 3 Using a Phillips-head screwdriver, remove the 2 screws shown in the image. Also remove the 2 screws beneath the rubber feet. 4 Remove the screws and plastic bottom of the Fill & Charge station. 5 Cut the wires to separate the rechargeable batteries from the appliance.
  • Page 21 English 3 Firmly grab the handle with one hand at the top and one hand on the bottom. 4 Snap the handle into two parts. Note: This step requires a good amount of physical force. The top and bottom half of the handle should be separated once you snap the handle.
  • Page 22: Guarantee And Support

    Remove the battery and dispose of it properly (not in household waste). Guarantee and support If you need information or support, please visit www.philips.com/support or read the separate worldwide guarantee leaflet. Guarantee restrictions The terms of the international guarantee do not...
  • Page 23 Empty page before back cover...
  • Page 24 Sonicare and the Sonicare logo are trademarks of Philips Oral Healthcare, LLC and/or KPNV. ©2016 Koninklijke Philips N.V. (KPNV). Tous droits réservés. Philips et le blason Philips sont des marques de commerce >75% recycled paper de KPNV. Sonicare et le logo Sonicare sont des marques de >75% papier recyclé...

Table of Contents