Table of Contents
Advertisement
12
English
Double burst: 2 LEDs
Triple burst: 3 LEDs
Note: The AirFloss remembers what mode was
selected last and it is ready for the next use. If your
AirFloss becomes fully drained of power, it will go
back to the triple burst default mode once it has
been recharged.
1 Place the nozzle tip between two teeth at your
gum line. Slightly close your lips over the nozzle
when it is in place, to avoid splashing.
2 Press the activation button to deliver 1-3 bursts
(depending on the selected mode) of air and
micro-droplets of mouthwash between the
teeth.
3 Slide the nozzle tip along the gum line until you
feel it settle between the next two teeth.
4 Continue until you have sprayed from in front of
and behind all spaces of the teeth, including
behind your back teeth.
5 To turn off AirFloss, press and hold the
power/mode button for one second.
Note: Refill the handle reservoir as needed.
Auto-burst function
Hold the activation button to deliver bursts
continuously, approximately one second between
set of bursts.
Advertisement
Table of Contents
