iSCSI Configuration
iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.
Once the name of the iSCSI Initiator is entered into the system, configure the proper settings
for the following items.
Add an Attempt
Delete Attempts
Change Attempt Order
Intel® Ethernet Connection X553/X557-AT 10GBASE-T - 0C:C4...
Intel® Ethernet Connection X553/X557-AT 10GBASE-T - 0C:C4...
Intel® Ethernet Connection X553 10GbE SFP+ - 0C:C4:7A:F4...
Intel® Ethernet Connection X553 10GbE SFP+ - 0C:C4:7A:F4...
These items display the following information :
NIC Configuration
Link Speed
Use this feature to change the link speed and duplex for the current port. The options are
Auto Negotiated, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.
Wake On LAN
Select enabled to wake the system with a magic packet. The options are Enabled and
Disabled.
Blink LEDs
This feature allows the user to specify the duration for LEDs to blink. The range is from 0 ~
15 seconds. The default setting is 0.
Port Configuration Information
This section displays the following port information:
•
UEFI Driver
•
Adapter PBA
•
Device Name
•
Chip Type
83
Chapter 4: BIOS