Table of Contents
Advertisement
A2SDi-H-TP4F/TF User's Manual
CPU SLOT7 PCI-E 3.0 X4 OPROM
Use this item to select the firmware type for the add-on card for this slot. The options are
Disabled and EFI.
M.2 PCI-E 3.0 X2 OPROM
Use this item to select the firmware type for the add-on card for this slot. The options are
Disabled and EFI.
Onboard LAN Option ROM Type
Use this item to select the Onboard LAN Option ROM type. The options are Disabled and EFI.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled and
EFI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Use this feature to enable Ipv4 PXE Boot Support. If this feature is disabled, it will not create
the Ipv4 PXE Boot option. The options are Disabled and Enabled.
Ipv6 PXE Support
Use this feature to enable Ipv6 PXE Boot Support. If this feature is disabled, it will not create
the Ipv6 PXE Boot option. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the ESC key to abort the PXE boot. The
default is 0.
Media Detect Count
Use this feature to select the wait time in seconds to detect LAN media. The default is 1.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration
76
Advertisement
Table of Contents
