Navigate Through The Interface - Compaq IPAQ H3800 SERIES Getting Started Manual

01 Getting Acquainted.fm Page 13 Thursday, August 16, 2001 1:46 PM
My Compaq iPAQ Pocket PC is 1 Press and hold the two out-
not responding or an side application buttons
application hangs
2 Insert the stylus into the unit
Perform a soft reset of your Com- reset switch at the bottom of
paq iPAQ Pocket PC your Compaq iPAQ Pocket PC
1 Insert the stylus into the unit 3 Press the switch for 5 sec-
reset switch at the bottom of onds
your Compaq iPAQ Pocket PC
4 To reactivate your Compaq
2 Press the switch for 1 second iPAQ Pocket PC, insert the
stylus into the unit reset
I forgot my password
switch and press the switch
for 1 second or connect your
Perform a hard reset of your Com-
Compaq iPAQ Pocket PC to
paq iPAQ Pocket PC
the AC Adapter
CAUTION: Because most of
Navigate through the
the applications and data you
Interface
install on your Compaq iPAQ
Pocket PC are held in memory,
Navigate through the Compaq iPAQ
you will need to reinstall them if
Pocket PC interface in three ways:
you perform a hard reset.
• tap
• tap and hold
• press application buttons
Tap the screen with the pointed tip
of your stylus to open applications
and make selections. For exam-
ple, tap the Start menu to see a list
of applications available.
Tap and hold an area on the screen
to see a pop-up menu.
Press an application button on the
front panel to quickly turn on the
screen and open your Calendar or
your Contacts or make a recording.
Realign the screen
When you turn on the screen of
your Compaq iPAQ Pocket PC for
the first time, you are guided
through the alignment process.
Realign your screen if
13