Set - Orion 430LED4K Instruction Manual

Option
SELECT REGION
INPUT
AUDIO INPUT
ENTER 4P MODE
SELECT REGION
4P LEFT TOP
4P LEFT LOW
4P RIGHT TOP
4P RIGHT LOW
4P FULL
INPUT
LEFT TOP INPUT
LEFT LOW INPUT
RIGHT TOP INPUT
RIGHT LOW INPUT
AUDIO INPUT
LEFT TOP INPUT
LEFT LOW INPUT
RIGHT TOP INPUT
RIGHT LOW INPUT
2.2.7.

SET

Option Function
DISPLAY SET Choose the setting of display function.
AUDIO SET Adjust the setting of Audio.
OSD SET Adjust the setting of OSD Menu.
OD (Over Driver) Accelerate the panel response time .
INFORMATION Show display information
RESET Restore to factory settings
DISPLAY SET
BACK LIGHT Adjust the brightness of back light from "0-100".
LOW BLUE LIGHT To open or close low blue function.
SHARPNESS Adjust the sharpness parameters according to ambient light from "0-4".
ASPECT RATIO Choose Full, 1:1, 16:9 or 4:3 display.
4K LED MONITOR 430LED4K & 550LED4K
Function
Select which region to edit
Select the display channel
Select the audio channel
Enter into four spiting pictures, left top, right top, left bottom, right bottom.
Select the left top display area.
Select the left low display area.
Select the right top display area.
Select the right low display area.
Select all display area.
D0 DP, D1 HDMI, D2 HDMI, D3 HDMI, D4 HDMI, AUTO.
D0 DP, D1 HDMI, D2 HDMI, D3 HDMI, D4 HDMI.
D0 DP, D1 HDMI, D2 HDMI, D3 HDMI, D4 HDMI.
D0 DP, D1 HDMI, D2 HDMI, D3 HDMI, D4 HDMI.
Choose audio input of the left top diplay.
Choose audio input of the left low diplay.
Choose audio input of the right top diplay.
Choose audio input of the right low diplay.
9
Value
See table below
See table below
See table below
Value
See table below
See table below
See table below