Table of Contents
Advertisement
Depart. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
8.9
BeDj Test Procedure
The BeDj Test procedure as to be performed only if the customer complains about BeDj application
Before starting the BeDj procedure it must be assumed that the functional test and the radio test have been done
successfully.
T
he bellow BeDj Test Procedure is a simply a basic test to check some functionalities of BeDj. You must adapt it
with cu
stomer complaint.
1. Launch BeDJ by pressing the B
2. When the BeDJ screen is active, press OK , to access the opt
3
. Select BeDj Styles and choose one of the available Styles in the list and press OK , to confirm your choice.
Y
ou must choose a BeDj Styles to make a complete test because it is sure that it contain all 9 tracks activated
4. The phone automatically goes back to the BeDJ screen, and the melody associated to the BeDj Styles/ringer
you have selected is divided into tracks.
Now, you can activate and deactivate tracks. Check All tracks.
5. When ready to record your mix, press
6
. Wait a few seconds and Press
p
ress OK.
7
. Enter a name for you mix and press OK.
8
. Check if the recording you save appears under the name of your choice in Settings > Sounds > Ringer list as
well as in Multimedia > Sound album.
PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
eDJ button, on the top right corner of your mobile phone.
. The timer starts and the "On air" red icon is selected.
to stop recording. After you have a menu choice, select "Store Mix" and
COMPANY RESTRICTED
VY-V-640-P530
Page : 40 of 64
Langue : EN
Date : 21/07/03
ions l
ist.
VY-V-640-P530
s.
Advertisement
Table of Contents
