l User’s Manual VIO-100(200)/MX100 Table of Contents Prefaces …………………………………………………….……………………………………………. 04 Revision …………………………………………………………………………………………..……………….……….. 04 Disclaimer ………………………………………………………..…….…….………………………….……………….. 04 Copyright Notice …………………………………….…………………….…………………………………………… 04 Trademarks Acknowledgment …………..………………………………………………………....04 Environmental Protection Announcement …………………………….………………….……………….. 04 Safety Precautions ………………………………………….……………………………….…………….………….. 05 Technical Support and Assistance …………………………………….…………….…………….…………….06 Conventions Used in this Manual ………………………………………………………………….….………..06 Package Contents …………………………………………………………………………………………….…………...
Page 3
l User’s Manual VIO-100(200)/MX100 OSD Operation ……………………………………………….…….……….…….………..... 30 2.2.1 Luminance ……………………………………………………………….………………..…. 30 2.2.2 Picture ……………………………………………………………………..………………..…. 31 2.2.3 Color …………………………………………………………………………..……………..…. 31 2.2.4 OSD Settings …………………………………………………….………………………..…. 31 2.2.5 Setup ……………………………………………………………………..…………………..….32 System Setup …………………………..……………………………… 33 Chapter 3 Set torque force to 3.5 kgf-cm to execute all the screwing and unscrewing ..……………………………………………………………………………………….…...
Preface l User’s Manual VIO-100(200)/MX100 Prefaces Revision Revision Description Date Manual Released 2016/10/06 Disclaimer All specifications and information in this User’s Manual are believed to be accurate and up to date. C&T Solution Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in this document is subject to change without notice and does not represent a commitment on the part of C&T Solution Inc.
Preface l User’s Manual VIO-100(200)/MX100 Safety Precautions Before installing and using the equipment, please read the following precautions: Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage. The power outlet shall be installed near the equipment and shall be easily accessible. ...
Preface l User’s Manual VIO-100(200)/MX100 Technical Support and Assistance 1. Visit the C&T Solution Inc website at www.candtsolution.com where you can find the latest information about the product. 2. Contact your distributor, our technical support team or sales representative for technical support if you need additional assistance.
Preface l User’s Manual VIO-100(200)/MX100 Package Contents Before installation, please ensure all the items listed in the following table are included in the package. VIO-110/MX100 VIO-112/MX100 Item Description Q’ty Item Description Q’ty VIO-110/MX100 Series Touch VIO-112/MX100 Series Touch Monitor Monitor Panel Mount Kit Panel Mount Kit USB Cable...
l User’s Manual Chapter 1: Product Introductions VIO-100(200)/MX100 1.1 Overview The VIO-100/MX100 and VIO-200/MX100 series touch monitor provide a wide selection of display sizes are available from 10.4” to 21.5” with a format aspect of 4:3 and 16:9, and selected touch type. Featuring with flat surface, IP 65 dust/waterproof front panel, and aluminum die-casting front frame with rugged body structure, it is rugged and reliable for industrial environment.
l User’s Manual Chapter 1: Product Introductions VIO-100(200)/MX100 1.2 System I/O 1.2.1 Rear DC IN COM Port for Touch Panel Connector (Resistive Used to plug a DC power input with terminal Touch Only) block. Use the rear panel female DB-9 touch panel connector to connect the monitor to the system DVI-D interface.
l User’s Manual Chapter 1: Product Introductions VIO-100(200)/MX100 1.2.3 Top VESA Mounting Hole These are mounting holes for VESA mount (75x75mm and 100x100mm)
l User’s Manual Chapter 2: Front Panel Controls VIO-100(200)/MX100 2.1 Users Controls POWER MENU INCREASE DECREASE AUTO 2.1.1 Power Button Turns the monitor on or off. 2.1.2 1. Blue indicates power on. 2. Yellow indicates standby mode. 2.1.3 MENU/ Enter Button Press to view the OSD menu.
l User’s Manual Chapter 2: Front Panel Controls VIO-100(200)/MX100 2.2 OSD Operation 2.2.1 Luminance ■ Brightness Adjust the luminance level of the screen. ■ Contrast Adjusts the contrast level of the screen. ■ Gamma This item allows you to on or off the Gamma function. ■...
l User’s Manual Chapter 2: Front Panel Controls VIO-100(200)/MX100 2.2.2 Picture ■ Phase Adjust the monitor internal signal phase. ■ Clock Adjust the monitor internal sampling clock rate. ■ H. Position Adjusts the position of the screen image left and right. ■...
l User’s Manual Chapter 2: Front Panel Controls VIO-100(200)/MX100 2.2.5 Setup ■ Language Selects the language in which the OSD menu is displayed. The factory default is English. ■ Mute Allows the user to turn the Mute On or Off. ■...
l User’s Manual Chapter 3: System Setup VIO-100(200)/MX100 3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and unscrewing. In order to prevent electric shock or system damage, before removing the chassis cover, must turn off power and disconnect the unit from power source. 3.2 Connecting MX100 monitor module with VIO display module 1.
Page 35
l User’s Manual Chapter 4: System Setup VIO-100(200)/MX100 3. Lock the below 6 screws (M4x5L).
Page 36
Copyright 2016 C&T Solution Inc. All Rights Reserved www.candtsolution.com...