Installation - JVC LT-42DR9BJ Manual

Installation

Installation
Service Scan
Signal Check
Factory Settings
Service Scan
Update the PR list
Service Scan 14:00 05/05/2008
Service
Automatic
Scan
Start Channel _ _
_ _
Stop Channel
Mode Add
Start Scan
Navigate Select MENU Exit
OK
Scan Select a "Scan" type
Automatic : Scan all receivable channels
Manual : Scan between the "Start channel" and "Stop channel"
Network : Scan all receivable channels, then you can select the
broadcasting stations to register
Start channel
If you select "Manual", select the broadcast channel
numbers to start and stop scanning.
Stop channel
Mode Select a "Mode"
Add : Register only new channels and update the PR list.
The current PR list settings will not be changed. No
channel will be deleted.
Reinstall : Re-install all channels. The current PR list settings and
"Timer" settings will be cancelled. The channels which
the TV could not receive will be deleted.
To update the PR list
Set "Scan" to "Automatic" or "Network". If you want to retain the
current PR list settings and "Timer" settings, set "Mode" to "Add".
Then start "Service Scan".
To start "Service Scan".
Mode Add
Start Scan
A select "Start Scan"
B start scanning
If you set "Scan" to "Network", the "Network" menu appears. Select
broadcasting stations from a list.
A select
Network Name
BBC
ITV
Customising your TV
Scan completed! Store services?
Yes No
A select "Yes"
B set
B registered / cancel
C set
14