Bluetooth Mobile Phone - JVC KW-V640BT Instruction Manual

Bluetooth® Bluetooth®
Changing the device name of the unit
displayed on the paired device
1
Display the <Change Device Name>
screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [Device
Name].
2
Enter the device name ( 1
the entry ( 2 ).
• To clear the last entry, touch [BS].
• To move the entry position, touch [
26 ENGLISH

Bluetooth mobile phone

When a call comes in...
Touching the operation keys performs the following
actions:
), then confirm [ ]
[ ]
[Speech
Quality]
H ]/[ I ].
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from the rear view camera is displayed.
AM
10:00
Mon. Jan. 1
Phone
Answers a call.
Rejects a call.
Displays the <Speech Quality adjust>
screen.
• Microphone Level: Adjusts the
microphone volume level. (–10 to 10,
initial: 0)
• Echo Cancel Level: Adjusts the echo
volume level. (OFF, –5 to 5, Initial: 0)
• Noise Reduction Level: Adjusts the
noise reduction volume. (OFF, –5 to 5,
Initial: 0)
During a call...
AM
10:00
Mon. Jan. 1
Phone
Touching the operation keys performs the following
actions:
[ ] Ends a call.
Mutes the volume of the microphone.
[ ]
[ ]/
Switches between hands free mode
[ ]
and phone mode.
[DTMF] Enters DTMF (Dual Tone Multi
Frequency), then sends text using the
keypad.
[Speech Displays the <Speech Quality adjust>
Quality] screen.
• See the left column for details.