Av Settings - JVC KW-V640BT Instruction Manual

Settings Settings
<Fader/Balance>
Touch [ J ]/[ K ]/[ H ]/[ I ] or drag the
<Fader>
Adjusts the front and rear speaker output balance.
When using a two-speaker system, set the fader to the
center (0).
• F15 to R15 (Initial: 0)
<Balance>
Adjusts the left and right speaker output balance.
• L15 to R15 (Initial: 0)
To clear the adjustment: Touch [Center].
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. The volume level will automatically
increase or decrease when you change the source.
If you have increased the volume first, then reduced
the volume using the Volume Offset, the sound
generated if you suddenly switch to another source
may be extremely loud.
• –5 to +5 (Initial: 0)
To initialize the setting value: Touch [Initialise].
<Sound Effect>
Adjust the sound effect.
<Bass Boost>
Selects the bass boost level.
• OFF (Initial)/1/2/3
34 ENGLISH
<Loudness>
Adjusts loudness. (The LOUD indicator lights up when
mark to adjust.
the loudness is adjusted.)
• OFF (Initial)/Low/High
<Volume Link EQ>
Reduces the driving noise by raising the bandwidth.
• OFF (Initial)/ON
<Space Enhancement>*
Virtually enhances the sound space using the Digital
Signal Processor (DSP) system. Select the enhance
level.
• OFF (Initial)/Small/Medium/Large
<Digital Track Expander>
Restores the sound lost due to audio compression to a
realistic sound.
• OFF/ON (Initial)
<Sound Response>
Virtually makes the sound more realistic using the
Digital Signal Processor (DSP) system. Select the sound
level.
• OFF (Initial)/1/2/3
<Sound Lift>
Moves the localization of the sound image to the
lower or higher point. Select the height.
• OFF (Initial)/Low/Middle/High
* You cannot change the setting when "Tuner" is selected as the
source.

AV settings

(Only for KW-V640BT Region 3 except for
Indonesian models/ KW-V640BTM Region 2/
KW-M540BT Southeast Asian models/
KW-M540BTM)
Display the <AV> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [AV].
SETUP
AV Display User Interface Camera
Special Bluetooth Security
Navigation
E.g. Setup screen for KW-V640BT Region 3
<TV Tuner Control>
• ON: Enables control of TV operation on "AV-IN".
• OFF (Initial): Select this to use "AV-IN" with
components other than TV Tuner.