How To Initialize The Blu-Ray Disc Home Theater - Philips HTS5506/F7 Service Manual

HOW TO INITIALIZE THE BLU-RAY DISC HOME THEATER

To put the program back at the factory-default,
initialize the BD player as the following procedure.
Note:
• By initializing, network is reset to disconnected state
and "Network Service Disclaimer" appears on the
screen.
• Once the unit is initialized, the unit starts in Virgin
Mode the next time it is turned on. The Virgin Mode
allows quick set up of language and network settings.
To exit this mode, select "Cancel" on the screen.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [ ] (skip up), [1], [2], and [3] buttons on the
remote control unit in this order.
Fig. a appears on the screen. All VFD lights.
Version Display
F/W Name : *******
Version : *.**.**
Region : *-*
Pickup : **
ESN : ********************************
DRM : OK
Default Setting : --
Default Setting : STOP
VFD/LED Check : OK
Fig. a
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
Version Display
F/W Name : *******
Version : *.**.**
Region : *-*
Pickup : **
ESN : ********************************
DRM : OK
Default Setting : SUCCESS
Default Setting : STOP
VFD/LED Check : OK
Fig. b
Fig. c
5. After initializing, the power will turn off
automatically.
" * " differ depending on the models.
End : STANDBY-ON
" * " differ depending on the models.
End : STANDBY-ON
1-6-1 E1U21INT