Philips HTS5506/F7 Service Manual page 17

How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [ ] (skip up), [1], [2], and [3] buttons on the
remote control unit in that order.
Fig. f appears on the screen. All VFD lights.
Version Display
F/W Name : *******
Version : *.**.**
Region : *-*
Pickup : **
ESN : ********************************
DRM : OK
Default Setting : --
Default Setting : STOP
VFD/LED Check : OK
Fig. f
4. To exit this mode, press [
" * " differ depending on the models.
End : STANDBY-ON
] button.
1-7-2 HT4(P&F)_FW(VFD_Netflix)FW