Operation Instructions - Fenix TK72R User Manual

Lockout function

Low-voltage warning function

Digitally regulated output maintains constant brightness

Intelligent overheat protection protects from high surface temperature

Reverse polarity protection to protect from improper battery insertion

Made of durable high-strength and oxidation-resistance aluminum

Premium type HAIII hard-anodized anti-abrasive finish

Toughened ultra-clear glass lens with an anti-reflective coating


Operation Instructions

ON
With the light off, press and hold the switch
used brightness.
With the light off, press and hold the switch
lumen output.
With the light off, press and hold the switch
lumen output.
OFF
With the light on, press and hold the switch
Output Selection
With the light turned on:
(1) Output ranges from 100 lumens to 9000 lumens
(2) Single click the switch
switch over 0.5 seconds, then the output will increase 1000 lumens for each pressing.
(3) Single click the switch
switch over 0.5 seconds, then the output will decrease 1000 lumens for each pressing.
Strobe
In any status, press and hold the switch
return to the last used brightness.
Instant Turbo
With the light switched on, single click the switch
for 0.5 seconds to turn on the light with the last
for 0.5 seconds to turn on the light with 200-
for 0.5 seconds to turn on the light with 5000-
for 0.5 seconds to turn off the light.
, for each single clicking, the output will increase 100 lumens. Press
, for each single clicking, the output will decrease 100 lumens. Press
over 1.2 seconds to enter strobe, click once again to
to enter Turbo, click once again to return