Daikin FXZQ05TAVJU Operation Manual page 6

1. Open the suction grille.
Push the two tabs and slowly let the suction grille down.
2. Take out the air filter.
Carry out the work in the order mentioned below.
2
1
1 Pull the air filter end inclined downward and unhook the
hooking hole of the air filter from the projection of the
grille. (both right and left)
Air filter
2 Lift the air filter and unhook the hooking hole of the air
filter from the projection at the grille upper part. (both
left and right)
Air filter Grille projection
Lift up
2
Hooking Grille
hole projection
Hooking hole Grille projection
3. Clean the filter.
Clean the dust with a vacuum cleaner or wash it with
water.
If the air filter is
extremely dusty,
wash it with
neutral detergent
using a soft brush.
NOTE
• Do not wash the air filter with hot water of 122°F (50°C)
or higher.
It may cause decolorization and deformation.
• When drying the filter, do not heat it with fire. It may
cause burning.
• Do not use chemicals such as gasoline, benzine, thin-
ner, polishing powder and liquid insecticide sold in the
market.
It may cause discoloration and deformation.
4. Attach the air filter.
Attach the air filter in the reverse order mentioned in
step 2 (page 2).
5. Close the suction grille.
Slowly push up the suction grille, and finally while pushing
the two tabs, securely fix the suction grille to the decora-
tion panel.
6. Turn off the indication "Time to clean filter" displayed
on the remote controller after turning on the power.
• For details, refer to the operation manual attached to
the remote controller.
The indication can be turned off whether in operation or
at stop.
After dewatering,
dry the air filter in
the shade.
English