Cleaning The Vehicle - TVR T350 Owner's Handbook Manual

Routine Maintenance
Tyres
To obtain the maximum performance from the tyres it is advisable to avoid excessive
braking and cornering whenever possible, during the 0-500 mile period.
Brakes
To bed the brake pads in correctly, avoid excessive braking during the first 500 miles,
unless required to do so in an emergency.
Petrol Filling
The fuel filler cap is located in the boot, next to the left boot hinge. Press and twist
the cap by turning anti-clockwise.
Please note: Any petrol spilt onto the paint work should be washed off immediately
to prevent staining. The TVR T350 is designed to run exclusively on unleaded fuel and
is fitted with a narrow fuel filler neck, making it compatible only for unleaded fuel
pumps at petrol stations.

Cleaning the Vehicle

Exterior Cleaning
By Hand
The body work can be washed using a mild detergent or specialist car shampoo.
A low pressure hose pipe should be used to rinse the vehicle. Specialised cleaners
should not be used when cleaning the road wheels.
Using a power wash
TVR Engineering do not recommend that you power wash any part of your T350.
However if you do decide to do so, do not spray the high pressure jet directly at the
paintwork, the mirrors, the door release switches, the boot release switches, under
the rear wheel arches, directly into the nose or directly at the door/window seals.
Do not, under any circumstances, power wash the engine bay, as this will cause
serious electrical problems. Please avoid using any wheel cleaner sprays or traffic
film remover "solvents".