Table of Contents

Advertisement

Unlocking & Disarming the alarm
As you approach the vehicle, press the button on the radiokey. The vehicle will
acknowledge the signal by flashing its hazard warning lights once and unlocking the
doors. Once unlocked, to gain entry to the vehicle, press the exterior door release
button located under the door mirror.
Please note: If you do not turn the ignition on within 9 seconds of disarming the alarm,
the immobiliser will become active.
Electronic contact key operation
To show that the vehicle is immobilised a small LED on the immobiliser disarm socket
will flash. Before turning the ignition insert the contact key into the socket, on
removal the LED will be extinguished to show that the immobiliser has been turned
off. The vehicle can then be started.
Please note: If the ignition is not switched on within 9 seconds the immobiliser will
be reset.
System diagnostics
The alarm system is capable of indicating whether the alarm has been triggered in
your absence. The LED mounted on the door mirror adjustment panel, will flash in
one of the following sequences to indicate which circuit triggered the alarm:-
1. Internal sensor
2. Door trigger
3. Bonnet/Boot trigger
4. Ignition alarm
When multiple alarms have been triggered for various reasons, the codes that
identify them are indicated in sequence.
Instrumentation
1 flash every 6 seconds
2 flashes every 6 seconds
4 flashes every 6 seconds
8 flashes every 6 seconds

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for TVR T350

This manual is also suitable for:

T350 2003

Table of Contents