TVR T350 Owner's Handbook Manual page 56

Towing the Vehicle cont.
Please Note: Assistance from the brake servo will be lost after the first two or three
applications of the foot brake. This will increase the force required to depress the
brake pedal.
Starting Using Jump Leads
Second Car or Fully Charged
Your T350 has been fitted with a Jump Start/booster Port which is located under the
forward edge of the front sill (approx. 200mm in from the front wheel arch). This port
can be connected to a slave booster battery via a booster lead which is available
from your local dealer.
To jump start the vehicle:-
1. Switch off all unnecessary electrical loads.
2. Connect the booster lead to vehicle.
3. Connect the end of the lead, with the crocodile clip, to the
positive (+) terminal on the booster battery.
4. Connect the other lead to the negative (-) terminal on the
booster battery.
5. Start the engine in the vehicle which has the booster
battery, allow it to run for a few minutes.
6. Start the engine in the vehicle with the flat battery. If it starts
and runs smoothly, carefully disconnect the jump leads in
reverse order.
Please note: Ensure that one lead does not touch the clamp on the other lead when
connecting to the terminals.
Breakdown Cover
Routine Maintenance
Slave Battery
Booster
Connection
Discharged Tuscan
Car Battery