Programming And Operating Via Computer - Quantum Data 822S Quick Start Manual

Programming and Operation via Computer
Computer Data Ports:
RS-232
(9 pin male D-Sub)
2400 Baud (factory default)
8 Data Bits / 1 Stop Bit / No Parity
Pin #2 Data in / Pin #3 Data out
Pin #4 DTR in
Pin #7 RTS out / Pin #8 CTS in
10Base-T
This port is not supported by the
current firmware. Do not make any
connections to this port.
Video Generator Manager (VGM)
Quantum Data's VGM software package is supplied with this unit. It is the primary method of program-
ming custom video formats and test images in the Model 822S video generator. It can also be used to
operate the unit. The current version of VGM software is available to run under MS-Windows 95/98/NT.
The current version only supports communication with the 822S via a serial port connection. The VGM
software includes a help file that explains how to use the sofware. It also includes documentation on
the command language used by the generator.
Software Developers Kit (SDK) for Windows
This Software Developer's Kit (SDK) consists of a DLL and library for writing custom windows 95/98/
NT programs that communicate with all Model 801, 802 and 822 series generators. This SDK was
designed for use with Microsoft's Visual C++ version 6.0. It is not normally supplied with the generator.
The latest version of the kit is available for download from our Website.
68-00183 Rev. C
GPIB
Protocol: IEEE-488.2
NOTE:
affect when unit is re-initialized. A normal power up
GPIB Address
cycle will not read any changes in the switch settings
Tens Ones
Test Port
Reserved for use at factory for set-
up and testing. Do not make any
connections to this port.
Quantum Data, Inc.
(24 pin micro-ribbon recept.)
GPIB address switch changes only take
Page 9