Making Connections - Quantum Data 822S Quick Start Manual

Making Connections

AC Mains
Input & Switch
85 - 264 VAC
48 - 440 Hz Sine
300 Watts Max.
50 Ohm Differential ECL
Start of Line Pulse Output
75 Ohm - TTL Level
Start of Frame Pulse Output
75 Ohm - TTL Level
NOTES:
1) AC Mains power must be turned off while removing or installing any module. Failure to do so
may cause damage to the mainframe and/or module. Such damage is not covered by the
product or service warranties.
2) All modules contain electrostatic sensitive components. Proper static prevention measures
must be followed while handling the modules.
3) The Main Module must always be used in the bottom most slot of the mainframe.
4) The Sync Module must always be used in the second slot from the bottom of the mainframe.
Page 2 Model 822S Quick Start Guide
Rear View of
Model 822S
Analog Video Output
50 Ohm Differential
Pixel Clock Outputs
(Power & Test Signals)
Blank module for Model 822S
Video Module - Monochrome Output
Blank module for Model 822S
Analog Output Level
Calibration Inputs
User positionable Frame Sync
Output (75 Ohm - TTL)
Composite Sync Output
Sync Outputs (75 Ohm - TTL)
(75 Ohm - TTL)
Vertical and Horizontal