BD Diesel Performance 1030395 Installation Manual page 10

22 September 2015 TorqLoc# 1030395 10
Wiring The TORQLOC (without an exhaust brake)
This includes Jacobs E-Brake for Dodge ISB and US Gear D-Celerator exhaust
brakes:
For those applications where there is no exhaust brake installed, or, where the
automatic feature of the TorqLoc module is not desired or cannot be installed,
follow the same wiring instructions as in the previous pages, except remove the long
section of Brown wire on the 3-Pos. switch that is mentioned in the BPS section
and ignore the chart of where to hook up that long section of Brown wire.
The short section of Brown wire mentioned in the BPS section is still to be
connected to the BPS terminal on the module. NOTE: The Down/Green light and
the Mid/White light positions on the 3-position switch now serve no function. The
Up/Red light position is the only one that has a function, which is to manually keep
the convertor lock-up clutch engaged.
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com