ABB RELION 670 SERIES Manual page 104

Section 8
Standard compliance statement
98
Clause Title
5.3.3 c) Attempted use of
unauthorized
configuration
software
5.3.3 d) Invalid configuration
or firmware download
5.3.3 e) Unauthorized
configuration or
firmware file
5.3.3 f) Time signal out of
tolerance
5.3.3 g) Invalid field hardware
changes
5.3.4 Alarm point change
detect
5.3.5 Event and alarm
grouping
5.3.6 Supervisory
permissive control
5.4 IED cyber security
features
5.4.1 IED functionality
compromise
5.4.2 Specific
cryptographic
features
5.4.2 a) Webserver
functionality
5.4.2 b) File transfer
functionality
5.4.2 c) Text-oriented terminal
connections
5.4.2 d) SNMP network
management
5.4.2 e) Network time
synchronization
5.4.2 f) Secure tunnel
functionality
5.4.3 Cryptographic
techniques
5.4.4 Encrypting serial
communications
5.4.5 Protocol-specific
security features
Table continues on next page
Status Comment
Exception Client certificates are not in use
Comply
Exception Not supported
Exception IED validates the time
synchronization messages but it
does not alarm if message is not
within the tolerances of the IED's
clock
Comply IED send a hardware changed
detected alarm.
Comply
Exception Not supported
Exception Not supported
Acknowledge
Comply Services and ports used for real-time
protocols are listed in the user
documentation.
Exception File transfer functionality provided by
the IED user File transter protocol
over TLS.
Comply Feature not supported
Exception File transfer protocol over TLS
Comply Feature not supported
Comply Feature not supported
Comply
Comply Feature not supported
Comply Recommendation from the NIST
Computer Security Division are
taken into account in the
cryptographic techniques
implemented by the IED
Comply Feature not supported
Comply
Cyber security deployment guideline
1MRK 511 399-UEN B
670 series 2.2 IEC