Figure 7 Press Down On The So-Dimm Memory Module To Lock It In Place - Quanmax ECX-APL0 Series User Manual

4. Fully insert the module into the socket until a "click" is heard.
5. Press down on the SO-DIMM so that the tabs of the socket lock on both sides
of the module

Figure 7 Press down on the SO-DIMM Memory Module to lock it in place

Removing a DIMM:
To remove the SO-DIMM, use your fingers or a small screwdriver to carefully push
away the tabs that secure either side of the SO-DIMM. Lift it out of the socket.
Make sure you store the SO-DIMM in an anti-static bag. The socket must be
populated with memory modules of the same size and manufacturer.
ECX-APL0 Series User's Manual
37
Chapter 3