Table of Contents
Advertisement
System Installation
Memory Module Installation
Carefully follow the steps below in order to install the DIMMs:
1.
To avoid generating static electricity and damaging the SO-DIMM, ground
yourself by touching a grounded metal surface or use a ground strap before you
touch the SO-DIMM.
2.
Do not touch the connectors of the SO-DIMM. Dirt or other residue may cause a
malfunction.
3.
Hold the SO-DIMM with its notch aligned with the memory socket of the board
and insert it at a 30-degree angle into the socket.
Figure 6 Align the SO-DIMM Memory Module with the onboard socket
ECX-APL0 Series User's Manual
Chapter 3
36
Chapter 3
Advertisement
Table of Contents
