Tycon Systems ProWeatherStation TP3000WC Operation Manual page 14

When the desired setting function is displayed, press the "
setting menu. Change a setting with the key
increase/decrease digits in great steps. Press HISTORY key or wait for 30 seconds at any time,
device will return to normal mode.

TIME SETTING
After entering setting mode, the first setting function "TIME SETTING" will appear on
message board. Use the "
a)
b)
c)
d)
e)
f)

UNIT SETTING
After entering setting mode, the first setting function "TIME SETTING" will appear on
message board. Press"
Then use the "
a) Light unit select (lux, fc, w/m2)
b) Temperature unit select (C, F)
c) Pressure unit select (hpa, inhg, mmhg)
d) Wind speed unit select (km/h, m/s, bft, mph, knots)
e) Rainfall unit select (mm, inch)

RECORD SAVE INTERVAL: to set the interval of data recording.
Under setting mode, the first setting function appear on message board is "TIME
SETTING", Press"
Use the " " key to start setting of recording interval.
Use the /

RAIN SEASON SETTING
Under setting mode, the first setting function appear on message board is "TIME
SETTING". Press"
Press the " " button to start setting of the month of rain season. Press the
buttons to select the month from January to December.
Rain season is the time of year when most of a region's average annual rainfall occurs.
Rain season influence the annual rainfall maximum, minimum and total value. When one
month was selected, the annual rainfall and annual max/min rainfall were
0:00 of the first day of the selected month.
8000060 Rev 1 23-Feb-18
" key to select the desired sub functions:
TIME FORMAT:12H/24H
DATE FORMAT:MM-DD-YYYY / DD-MM-YYYY / YYYY-MM-DD select
TIME: Manual setting of time and date
TIME ZONE
DAYLIGHT SAVING TIME: switch on/off the reception of DST.
NORTH/SOUTH: Set northern/southern hemisphere for moon phase
"key to switch to "UNIT SETTING" display.
" key to select the desired sub functions:
"key repeatedly to switch to "RECORD SAVE INTERVAL" display.
keys to select the desired recording interval for measured values.
"button repeatedly to switch to "RAIN SEASON SETTING" display.
" key to start the associated
/ .Hold the
14
/ key for 2 seconds will
zero clearing
/
at