ViewSonic VB70a Pro User Manual page 7

If you add Wi-Fi web when you set MID for the first time, the Wi-Fi is
open. And you can come to step4 directly.
1. Touch set：
2. Touch wireless, web, and Wi-Fi one by one.
3. Select Wi-Fi and you can open it
The equipment should scan to find the Wi-Fi web.The web is
protected with locked icon.
If the equipment find a web you use before, MID should connect
with it.
4. Touch the web and it could be connected.
If the web is open, the system should ask you if you want to link
with this web. Then you can just touch link. If the web is protected,
the systerm should alert you to put in the password or other
evidence.
After linking the web, you could set on Wi-Fi:"name of the web on
the screen, the speed, safety, address and some thing related on the
web."
Network Information:
Normally, if the Wi-Fi is on, when you MID detect Wi-Fi web opend, the
web should show on the below of it. You could touch it directly to link.
1. If Wi-Fi is not closed, pls open it.
2. Select the web inform on the screen of "Wi-Fi set", then you can
cancel to select the options to quit receiving data.
Add Wi-Fi web:
You could add Wi-Fi web so that MID can remember it, the related safety
data and link with the web auto when come to the coverage. If there is not
a Wi-Fi network name (SSID) broadcast, you need to add the network to
connect. And you can add the web where it is not covered by the Wi-Fi.
If you want to connect the web protected, you should contact with the
administrator to get the password or other necessary safety data.
1. If you do not open Wi-Fi, pls open.
If you add Wi-Fi when first set MID, the Wi-Fi is open already.
2. Touch add Wi-Fi web on the screen of "Wi-Fi Set".（ On the
7